DIRECTV 1820BXLNB Phase 3 Elliptical Antenna for Directv

DX Antenna's DSA-20MA DIRECTV multisatellite dish antenna is designed for use with up to 4 independently operating DIRECTV Receivers, providing not only reception for local stations but for DIRECTV's PARA TODOS Spanish-language programming and even high-definition broadcasts. A suitable antenna site requires an unobstructed view of the southern sky, a stable antenna mounting surface, a distance of 100 feet or less for RG 6 (RF coaxial) cable from your antenna to your receiver, and nearby grounding.

The dish comes with a detailed user's manual and installation guide including important safety precautions. Due to the many configurations possible, mast-mounting hardware is not included.

For installations where the RG 6 cable runs from the receiver(s) to the LNB exceeds 100 feet (say, 150 feet or more, as encountered in a commercial or multi-dwelling building), you'll need to use an AC power-booster module to bias the LNB. You will also need an additional RF signal amplifier to compensate the signal loss to avoid frequent outages in adverse weather. Please contact a professional installer in these cases.

Included with this Product
Satellite dish reflector, mounting hardware (4 bolts and 4 screws), LNB arm/antenna back assembly, triple-head, multi-satellite LNB mounting hardware, LNB mounting hardware (2 bolts and screws), a grounding screw, an EZALIGN mast, and a user's/installation manual.

Note: Tools required for installation consist of: a 7/16 nut screwdriver, an adjustable wrench, a Phillips-head screwdriver, a magnetic compass, and an electric drill (with bit). Optional accessories include: mast-base mounting hardware, RG 6 coaxial cables with F-type connectors, grounding hardware (wire, wire clips, etc.), and a 6-inch plumbing level.

Owner Reviews, Ratings, Comments and Criticism
Bought to replace an aging 18" round dual LNB antenna which had been in service since early 1999, plastic around LNB was cracked and some of plastic was missing. Didn't need the arm that came with this new dish, used old arm which was already mounted on my chimney, but with the level bubble in the new arm looks like it would have been easy to install however.